I’ve enjoyed reading the Q&A on rigs on your site…and have a question…I wonder if this is the way to communicate it?

I have a 60′ aluminum centerboard boat–very French looking. I love the boat but the rig is a handful. The mast came out of Fortuna Light–a Whitbread boat from the 80s. It’s very beefy, but also very tall–about 80′ off the water. I put a Harken track on the main so it’s not too bad to handle, although it takes a while to get it up. The headsails are a lot of work though. The boat has a fairly healthy weather helm (I’ve experienced worse, for sure) but the main is old, a bit baggy and has been cut and recut quite a few times. All in all, the sail area is generous, and I could probably get by with a little less.

What I’d like to do is re-rig the boat as a ketch, with nearly equal masts. Do you think I can get the mast height down to around 60-65′? There would be two natural places for masts, about 10-12′ fore and aft of the current mast. Can I use those spots and then design the sails to provide a balanced center of effort? Is this worthwhile or would I be better off buying electric halyard and Genoa winches? All the best, Willy R

Hi Steve, Along with other boats, I’ve been looking at a 47-foot ketch that has 454 sq.ft. in the foretriangle, 416 in the main (only one set of spreaders) and 182 in the mizzen. As the mizzen represents only 17% of sail area, by your recommendations on pg.645 of the Encyclopedia, this sail is more decorative than useful and the boat would probably be better rigged as a sloop with a removable inner forestay. If the mizzen were removed and a second set of spreaders added to the main mast to support the inner forestay, could this boat be expected to sail just as before? Or, is it more likely that the main mast would have to be moved aft and both the main and headsail be replaced? Thx for your comments, DM

I am restoring a 1980 Cheoy Lee 44 Ketch. She currently has wood spars. I have been considering having a taller main aluminum mast made with a longer boom and removing the mizzen all together, running her as a sloop. Is this possible? P.S. Love your books!! Best Regards, Larry

I am continuing to work on re-fitting my Columbia 45 with Mike Conner’s continued assistance.

We are beginning to engineer running halyards and lines back to my cockpit. I have main, jib and spinnaker halyards as well as the spinnaker topping lift halyard. My current main has one set of reef points and I intend to have two sets when I build my next main, so I am planning for two reefing lines. We would like to know whether I should plan to run these six lines back to the cockpit or if there are additional ones that should go back as well. If we run more than six, we are aware of deck organizers that stack the lines so four can run back with two on top of two.

Do you recommend for or against stacking lines with deck organizers?

Can you give a recommendation on which lines/halyards you most strongly recommend running back to the cockpit? Thank you for your input. – Eric

Hi Steve, I recently broke my mast on my 41 foot sloop and I am in a quandary in what to do. A new mast is pretty expensive and I am trying to avoid getting a new mast.

Some people have suggested that I sleeve and rivet the mast together (splice). I am not convinced if this method would have long-term advantages.

My mast broke right around the 1st spreaders with a relatively clean cut. It was a fractional rig. The aluminum mast is about 54 feet long. Do you think that a repair would be wise if done properly or would it be prudent to get a new mast if the budget permits? Thanks, Joey

Dear Steve, I have written before and always have received a kind and enlightening response. I recently had our mast unstepped, repainted, and rewired (spreader lights, vhf, wind NMEA, anchor lights, etc.) . The electronics guy installed a new pvc tube for a wire chase.

Our mast is stepped on deck (metal boat). The wiring feeds out of the mast about 6" above the deck. The cable splits into two bundles (taped) and the two bundles are fed through metal stand pipes throughwelded through the deck (port and starboard). The teak j box in the salon leaks whenever it rains.

I don’t know whether the electronics guy left a Ptrap with the wire before he fed it out of the mast. I also am wondering if the fit at the mast step could be so tight as to not allow water to drain out the step, but rather sit and collect until it gets deep enough to follow the wiring chase and ultimately end up in the cabin.

I don’t want to unstep the mast again to look. And I don’t want to unnecessarily bore a hole in the mast to allow drainage if no need exists. Any advice? Thanks, Wayne

Hi, our insurance requires us to replace all running rigging after 5 years (which is at the end of this year) whether it needs it or not. Probably not a bad idea. along the same lines, someone suggested all thru hulls be replaced after 5 years. Do you agree with the latter? Regards, Peter

Hi Steve, In the FAQ section under Rigs and Rigging you mention you use 3 to 3 1/4″ sliders in your mainsail system. Do you have these sliders in this length specially manufactured for you, and if so, who does it and what material is used? Or are they ‘off the shelf’? And lastly, do they have any metal inserts within the plastic for reinforcement? (I’ve searched extensively but apparently not well enough!) Thanks Rich

Steve, I’m looking at a Hardin 45 Ketch. It has two deck stepped masts. Would you consider that a trait that would be suitable for an offshore vessel? Know anything about these vessels? Les

Steve, I kept your 2 big books (Cruising Encyclopedia and Weather book) on the shelf, frankly afraid of them: they are so big, they intimidated meÉ So I kept reading smaller, easier to finish books for the past 3 years. Finally I gathered the courage to open your cruising encyclopedia and now I canÕt put it down: I donÕt even play spades on the computer anymore.

The fact is that I closed today on my first "big boat", is a 1989 Hylas 44, called Delta Tango, soon to be named "Alegria". I stopped working (or maybe my companyÕs business decided to slow down to the point that it stopped me) and plan to prepare to sail with her (my wife and Alegria) for the rest. Will shake down to Bermuda and BVI, afterwards going anywhere but including Alaska, Hawaii, Palmyra, Tonga, Tahiti, Western Europe, etc. I am 54, have some time to cruise, hopefully. Your book provides me with a lot of info that I intend to use to equip, improve and secure her. Your first advice in the book (donÕt start buying things and changing them around until you sailed for a while) is great advice. But hard to follow by someone like me who is always trying to improve things (and people, just ask my wife and kids!).

I called Hood and they prepared an estimate on a Vektron Main, reacher, stay sail and storm main. Initially I thought on getting the main (full batten, 5 of them), to go over the back stay, then I chicken out, now I am back on the first idea, making it elliptical, overlapping the back stay by some 8 inches. If it chafes, I guess I can cut it down to regular size. This is not a particulary fast boat, so I need all the sail I can get. I talked to the riggers at Nance & Ubderwood to build the baby stay and runners. Thank you for any advice you can give me. Regards, Pablo

We are recent owners of a ‘67 boat and sometimes find the hoisting/handling of the main to be cumbersome if not downright difficult. What modifications/solutions can you recommend? What of main furling system? Thank you. Best regards, Phil

After watching your Offshore Cruising Video, I happened to see a picture of a ketch rigged with junk sails. One reminded me of the other. Is that where you got the idea for the fully battened sails front and rear? I sure do like that combination. Do you think it would work for a 40 ft. boat? What is your opinion of junk rigged cruising sailboats? Sidney

I am thinking of building or buying a 40-ft yacht for long-distance bluewater cruising with a small family crew. Can you please give me some input to the rigging systems you have for your yachts? I have read some of your most interesting topics in Tech Talk–is there any for the 2-masted rigging? I’m very impressed with your boats. Yours, Bosse

Dear Mr. Dashew: November 2001 Sail magazine contains an article by naval architect Roger Marshall titled "Seamanship in High Winds" in which he states (page 36), “…I believe that every boat that is intending to go offshore should have a staysail stay, possibly made of aramid, on which to set the storm jib.” My question concerns the nature of such a staysail stay made of aramid. Could this be as simple as an aramid halyard attached to a folding padeye on deck made tight with a winch? (Assuming the geometry of the aramid halyard/staysail stay would be acceptable using the topping lift sheave, for example.) If so, such an arrangement might appeal to coastal cruisers such as myself, who would like to have the option of using a hanked-on storm jib on a staysail stay but have difficulty justifying a conventional staysail stay installation due to its low frequency or probability of use.

If my understanding, as set out above, of what Mr. Marshall intends is correct, how satisfactory would such an arrangement be in actual use? Do you believe this would be a good option for coastal cruisers such as myself? (I realize the scope of my question ignores additional important considerations like keeping the mast in column, possibly using running backstays or swept-back spreaders, etc. and the structural concerns of the deck handling the loads.) If such an installation is a reasonable approach, I am sure you can see the potential appeal for some cruisers. If one were lucky, installation might be as simple as installing a folding padeye on deck, replacing the topping lift with aramid line run to an appropriate winch (assuming the topping lift sheave is located opposite upper swept back spreaders) and buying a storm jib with hanks. Wishful thinking? As always, thank you for your assistance.—Downing Mears