{"id":18656,"date":"2011-10-20T13:46:21","date_gmt":"2011-10-20T18:46:21","guid":{"rendered":"https:\/\/setsail.com\/?p=18656"},"modified":"2017-01-26T14:42:33","modified_gmt":"2017-01-26T19:42:33","slug":"systems","status":"publish","type":"post","link":"https:\/\/setsail.com\/systems\/","title":{"rendered":"Systems"},"content":{"rendered":"
The heart of any cruising vessel – sail or power – is in its systems. It is the systems that bring you ambiance and pleasure (and, if not done correctly, a load of frustration).<\/p>\n <\/p>\n Most of what we’ve done with the FPB Series boat is based on what we’ve developed on our sailing designs. We have quiet, efficient, easily maintained systems. We are able to sit for long periods at anchor without charging the batteries. And there is sufficient redundancy to insure we don’t have to alter our plans due to maintenance problems. At the same time, we have worked hard to keep the systems – electrical, plumbing, HVAC, and drive line – as simple as possible.<\/p>\n There are a couple of key ingredients to all of this. The first is space and access.<\/p>\n If there is adequate space in which to install the systems, they go in more easily. We can then keep an eye on them on a periodic basis. Being able to inspect on a regular schedule means we are able to catch problems at an early stage – when they are simple to deal with and before they mutate into something more serious. Space also means that the systems are less costly to maintain. The photo above is taken from the starboard aft side of the FPB 83 engine room, looking forward. We have total access to all four sides, and below the engines.<\/p>\n The second ingredient is proper installation. We’ve learned the hard way that there is a right and wrong way to do electrical, plumbing, and mechanical work. Double hose clamps, for example, and an absolute must on anything below the waterline, pressurized plumbing, and the heating systems. We install component in such a way that it is safe from most drips and sprays. Electrical equipment is isolated in almost all cases. Double pole breakers are used on all DC circuits, and isolation transformers are used with shore power. This list could go on and on.<\/span><\/p>\n<\/a><\/p>\n