To A New Paradigm With FPB

FPB 64-5 Tiger: A Few Details On Deck

FPN 64 5 Tiger Ext details 2 1

It is Friday, we’ve got another batch of photos from New Zealand, but time for writing captions is still in short supply. So, this week we’ll let the photos speak for themselves.

FPN 64 5 Tiger Ext details 2 2

 

FPN 64 5 Tiger Ext details 2 3

 

FPN 64 5 Tiger Ext details 2 4

 

FPN 64 5 Tiger Ext details 2 6

 

 

FPN 64 5 Tiger Ext details 2 5

 

FPN 64 5 Tiger Ext details 2 8

 

FPN 64 5 Tiger Ext details 2 7

 

FPN 64 5 Tiger Ext details 2 9

 

 

FPN 64 5 Tiger Ext details 2 10

 


Posted by Steve Dashew  (May 19, 2012)




21 Responses to “FPB 64-5 Tiger: A Few Details On Deck”

  1. Scott Evangelista Says:
    I give up, what happend to the engine air intake?

    [Reply]

    Steve Dashew Reply:

    It is integrated into the port side seat base.

    [Reply]


  2. Ward Says:
    What’s the boat rafted to starboard? It would be interesting to compare Tiger to the (apparently) more commercial vessel next door…

    [Reply]

    Steve Dashew Reply:

    That’s a Circa design build from an earlier era.

    [Reply]


  3. David M. Says:
    From these shots the aft deck configuration appears to be somewhat different previous 64’s, additional storage lockers maybe? Evolving design or customer specific changes? Or I’m just seeing things?

    [Reply]

    Steve Dashew Reply:

    The new aft deck configuration is standard with boats five through nine.

    [Reply]


  4. David M. Says:
    What are the advantages of the new aft deck configuration?

    [Reply]

    Steve Dashew Reply:

    The main advantage is a cozy place to sit, lounge, read, and eat in the lee of the flying bridge. The trade-off is loss of an easily stored second dinghy. There is also a large locker under the stairs to the flying bridge for jackets, foulies, and shoes, freeing up the locker inside for use in the galley.

    [Reply]


  5. Conrad Says:
    Hi Steve….nice improvements, particularly the under stairs locker for wet gear etc. The new aft deck seating configuration appears to be permanently welded in place. I thought that it was going to be bolted in place to allow removal for that second dinghy stowage, if the need arose? Or is that an optional approach? Also, has anyone opted for the smaller galley/larger saloon area layout?

    [Reply]

    Todd Rickard Reply:

    Hi Conrad, Good catch! The aft deck seating arrangement you see aboard FPB 64-5, Tiger, has bolt-down seating sections, but the boxes aft are welded to the deck. These welded boxes accommodate the BBQ, and in Tiger’s case – a live bait well that has the shore power connections located in a separate section. For those wanting the option of carrying two dinghy’s aft, the more conventional aft deck, more similar to hulls 1-4, is still available. The new aft deck seating arrangement could carry a lightweight rowing or sailing dinghy in a custom rack above the starboard seat if a second dink is desired. The seating sections can unbolt from the deck, but are not likely to be removed unless access to the engine room through the soft-patch were required. Owners of hulls 6, 8, and 9, have selected the smaller galley/larger settee layout. It will be fun to experience this later in the year when #6 is delivered to her Australian clients. Todd Rickard – FPB Program Manager

    [Reply]


  6. Daryl Lippincott Says:
    One of my irritations with my present boat is the frequency and time involved with wiping down / polishing the stainless steel and one of the FPB 64 owners mentioned this also. Have you looked into the possibility of using Monel or one of the other copper/nickel alloys (70% copper 30% nickle?) for the handrails? While pricy it may make sense as a small percentage of the total cost on an owner operated boat of this size.

    [Reply]

    Steve Dashew Reply:

    The issue with the stainless is water spotting and salt build up, so, monel of copper/nickle won’t solve this problem. We are using a buffed and anodized aluminum pipe for the Matrix deck surrounding rails – same as we have done with Wind Horse. But for push/pulpit and life line stainless is still the metal of choice,,

    [Reply]


  7. Daryl Lippincott Says:
    I was actually thinking of all the rail around the Matrix deck on the big boat. The amount of rail on that seemed rather daunting. If one can hose it off and walk away I’m all over that. Speaking of hosing it off. Do you have a built in pressure washer system on your boats? If the pressure pump was in the engine room so all you had to carry around on the deck was 15ft or so to plug into several quick connects that would be very convenient.

    [Reply]

    Steve Dashew Reply:

    The rails around the Matrix deck are anodized aluminum. We had a pressure washing system year ago on Wind Horse. Today it is much simpler to buy a compact electric unit and move it around with you.

    [Reply]


  8. Roland Says:
    I noticed the open stairs going from the pilot house to below. In the event of a role over and or port hole breakage the water that enters the pilot house could go below. Wouldn’t it be safer to be able to seal off the below area?

    [Reply]

    Steve Dashew Reply:

    Actually, Roland, those open stairs are on the outside of the great room. Once you are down the stairs and standing on the main deck you then enter the great room through the its water tight door.

    [Reply]

    Roland Reply:

    Steve, I understand the great room is the deck level room with glass all around and an open stair way leading to below. In the event of a glass breakage in the great room it appears water has the open stairway to descend to the below levels. Would it be a safe feature to seal off the below levels from the great room with a water proof door? That way if there is a glass breakage water cannot go below. It would only have access to the great room.

    [Reply]

    Steve Dashew Reply:

    The windows are massively strong, with stiffness well in excess of the Lloyd’s Special Service rule. Forward windows have built in storm shutter system. Side windows have storm shutter provisions should one be lost. That said, we are looking into the practicality of sealing off the Great Room right now. we’ll keep you advised (and thanks for taking time to send the idea).

    Roland Reply:

    Steve, regarding your practical challenge with sealing off the great room I wonder if the option to put the door at the bottom of the stairs would have merit and in case you were exclusively thinking of putting it at the top of the stairs maybe this helps. A door at the bottom may not need much additional structure and would not obstruct the view to the outside from the great room. The only draw back is that in the unlikely event of water gaining access to the great room the stair well would be flooded. But all it would take is a hand pump nested somewhere permanently to solve that problem. I want my new day trading job to be massively successful so I can line up for this fantastic boat you have invented. In the mean time I will make due with my 30′ Cheoy Lee/Herreshoff.

  9. Daryl Lippincott Says:
    Was Roland referring to the Great Room / Pilot house? Is there a removable table for the aft deck seating area?

    [Reply]

    Steve Dashew Reply:

    I assume he was referring to the stairway between the Matrix deck and main deck, which is outside the man watertight door. There is table under the Matrix deck extension, aft of the great room aft bulkhead (along with a day head, outside storage, and a counter with a sink.

    [Reply]



Comments or Questions?